OBID FEIG ID ZK.AB-A, Инструкция по монтажу

Страница: 39 / 52

Identifikationssystem OBID
®
Montageanleitung ID ZK.AB-A
FEIG ELECTRONIC GmbH M00500.0de-ID-B.DOC Seite 39 von 52
4.3 How to program the transponder into ID ZK.AB-A:
WARNING: please make sure that an already occupied storage location is not overwritten
by a new number during the programming process. Otherwise, the transponder, who’s
number is overwritten, will loose its access authorization.
Bring the
“Masterkarte“ into
the antenna field and
select your desired
storage location
(see chapter 4.2)
0DV
WHUND
UWH
l
Example 35
Remove the
“Masterkarte“ from
the antenna field as
soon as the desired
storage location has
been reached.
(example 35)
0
DV
WH
UND
UWH
l
Storage location 35
lights up for approx.
3 s
l
After that, the
display will flash for
approx. 6s
Bring the new trans-
ponder into the detec-
tion area of ID ZK.AB-
A as long as the
display is flashing.
1
HZ
7UDQ
VSRQ
GHU
,'&
DUG
Remove the
transponder from the
detection area
1
HZ
7UD
QV
SR
QG
HU
,'
&
DU
G
l
The transponder is
programmed in the
selected storage
location and the right
decimal point lights
up
l
Notice:
If an already stored
transponder is inserted, the
display will skip to the
respective storage location.
l
The display skips to
the next storage
location
As long as the display
is flashing, the next
transponder may be
brought into the
detection area
Or
1
HZ
7UDQ
VSRQ
GHU
,'&
DUG
l
The transponder is
programmed into
the selected storage
location and the
right decimal point
lights up
Wait until the display
goes out and ID
ZK.AB-A returns to
the operational mode
l
The display goes
out