Identifikationssystem OBID
®
Montageanleitung ID ZK.AB-A
FEIG ELECTRONIC GmbH
M00500.0de-ID-B.DOC
Seite 36 von 52
3.8 Performance check
l
Switch on the power supply for ID ZK.AB-A
l
Authorize a transponder with the help of the “Masterkarte“
(see chapter 4.Programming)
l
Place a transponder in front of the reader
or
l
Place a transponder in front of the external antenna (as far as existant).
The device works perfectly, if:
In case of an already programmed
transponder
l
The storage location of the
transponder is indicated
on the LED-display of ID ZK.AB-A
l
The LED of the external antenna ID ZK.ANT-A
lights up green
l
The
relay
of
ID ZK.AB-A switches
In case of a transponder that has
not yet been programmed
l
Two dashes appear on the LED-
display (--)
l
The LED of the external antenna ID ZK.ANT-A
lights up red
l
The access control relay does not switch
