OBH Nordica Percolator
Before use
Please read the instructions carefully and safe them for future use before using for the
perculator for the first time.
Before the percolator is used for the first time, clean and rinse out the inside of the percolator,
the coffee basket, lid and percolating tube with warm water. Rinse carefully and allow to dry.
Note! Never immerse the appliance or it´s cord in water or any other liquid.
Parts of the appliance
1. Plastic knob
2. Lid
3. Strainer
4. Coffee basket
5. Tube
6. Body
7. Water level indicator
8. Pilot light
Using the percolator
1. Check that the appliance is not plugged in. Remove the lid, coffee basket and tube from
the percolator body. Fill the percolator with the desired amount of water. Never fill above
the MAX marking (12 dl). Do not plug the appliance yet.
2. Rinse the basked to prevent coffee grind to come into the appliance. Measure the coffee
grains out into the basket – one heaped spoon per cup. Do not fill the basket up to the
edge with coffee. Distribute the coffee evenly in the basket. Place the strainer on the
basket and place the basket/strainer over the tube.
Place the tube and the basket into the central hole at the bottom of the percolator body.
Check that the tube is correctly placed in the bottom by turning it. Place the lid on the
percolator.
3. Place the cord in the percolator body and after that, plug it to a wallsocket.
When the percolating process is complete, the indicator light will switch ON, indicating that
the appliance is in keep warm mode. The temperature of the coffee will remain constant
until you pull the plug.
1
2
3
4
5
6
7
8
15
2436_2437_2399_MB_1010.indd 15
2010-11-01 12:51:31
