OBH Nordica Master Steel+ 7748, Инструкция по эксплуатации

Страница: 36 / 40

If the appliance is not switched off manually within 3 minutes, the appliance
switches off automatically.
Overheating
If the appliance’s overheating cut-out is activated and the appliance switches
off (before 3 minutes of use): Turn the power switch OFF and unplug the
appliance. Wait 30 minutes before restarting the appliance.
Mixing hot liquids
(must not be mixed in the take-away
mug)
The blender jug can tolerate hot ingredients and liquids/soups up to 65°C.
When mixing a hot liquid in a closed container (e.g. the blender jug with the lid
on), pressure can build up due to the air in the jug expanding rapidly from the
heat. There is a risk, therefore, that when you start the appliance, the lid will fly
off and hot liquid will spray out. To avoid pressure building up when mixing hot
ingredients, start at a low speed and gradually increase the speed. The soup
programme is ideal for this.
1. Fill the jug no more than half full with the desired ingredients (such as
vegetables, root vegetables, etc.).
2. Start the blender and then slowly pour the liquid (hot stock, cream, or the
like) through the hole in the lid. Do not switch the blender off while doing
this. If the blender is switched off with hot liquid in it, and is then restarted,
pressure may form from the bottom due to the high speed of the motor,
causing the lid to fly off. Always start on the lowest speed and increase
gradually.
If, despite everything, the blender is turned off during the above process and
needs to be restarted, keep one hand on the lid – using a towel/pot holder or
similar – and watch out for any splashes of hot liquid. It is only hot liquid that
must not be mixed because the pressure in the jug gets too high.
If you want to add other ingredients or liquid while using the blender jug, you
can, provided the mixing process is stopped before the cap or entire lid is
removed. Make sure that the ingredients to be mixed are not too thick or too
heavy for the motor to process. If necessary, add a little liquid through the lid
if the motor is struggling or stop the mixing process and scrape the mixture
toward the blade using a rubber scrapper.
Do not add fizzy drinks to the take-away mug. Never store the take-away mug
in the fridge with the blade unit fitted without putting the lid on.
MAKE SURE THAT THE LID AND FILLER CAP ARE PLACED ON THE
BLENDER JUG BEFORE RESTARTING THE APPLIANCE!
36
7748_JG_0618.indd 36 2018-07-11 15:49:44