OBH Nordica Manhattan Steel 2, Инструкция по использованию

Страница: 22 / 28

22
13. Never use metallic utensils in or on the toaster and never
touch the element of the toaster.
14.
WARNING!
In order to avoid a hazard due to inadvertent
resetting, this appliance must not be supplied through
an external switching device, such as e.g. a timer, or be
connected to a circuit that is regularly switched on and off
automatically.
15. Always check the appliance, the cord and the plug before
use. If the cord is damaged, it must be replaced by the
manufacturer or his service agent or a similarly qualified
person in order to avoid a hazard.
16. The electrical installation must comply with the current
edition of the Danish declaration of high voltage current
concerning additional protection in the form of a residual
current device (RCD with a rated residual operating current
not exceeding 30 mA.) Check with your installer.
17. The appliance is for domestic use only.
18. If the appliance is used for other purposes than intended, or
is it not handled in accordance with the instruction manual,
the full responsibility for any consequences will rest with
the user. Any damages to the product or other things are
not covered by the warranty.
Before use
Before you use the toaster for the first time, read the instruction
manual carefully and save it for future use.
Use
Position the toaster on an even and heat-resistant surface. Plug
the switch to a wall outlet. Before you use the toaster for the
first time, let it get warm without any bread in order to get rid
of any impurities. Put the thermostat at 6. Next, press the bread
elevator. After a while the elevator will rise and the toaster is
ready for use.
2267_KL_1112.indd 22 2013-01-31 14:59:07