High rise function
If it is difficult to get the bread after toasting, the high rise function can be used.
The elevator rises, which makes it easier to get the bread.
“Lift and look” function
It is easy to check the toasting result without interrupting the toasting process
by simply pushing the elevator upwards at any time during toasting. Next,
push the elevator down to continue the toasting. If the result is OK, interrupt
the toasting by pressing the stop button.
Toasting
Position the toaster on an even and heat-resistant surface. Plug the switch to a
wall outlet. Before you use the toaster for the first time, let it get warm without
any bread in order to get rid of any impurities. Turn the thermostat button to
6. Next, press the bread elevator. After a while the elevator will rise and the
toaster is ready for use.
Put the bread in the slots and set the wanted degree of toasting (1-6) by means
of the thermostat button. Step 1 is the shortest toasting cycle and step 6 is the
longest toasting cycle (the darkest one). The further up the scale, the longer
toasting cycle. Press the elevator until it locks in he lowermost position. When
the toasting is done, the elevator will rise automatically and the toasting is
interrupted.
Note that the toaster has extra wide slots in order to toast big slices of bread
such as e.g. bagels. Note that the bread should not be squeezed into the slots.
We recommend that you cut the bread in halves in order that they do not stuck
in the toaster.
If you want to stop the toasting before the elevator rises automatically, press the
stop button and the toasting stops.
IMPORTANT!
The elevator will not be locked, if the toaster is not connected to
a wall outlet.
If bread gets stuck in the toaster, pull the switch and leave the toaster to cool.
You may turn the toaster upside down and carefully shake it to get the bread
out. If that does not work, try to carefully get the bread out. Never let metallic
utensils touch the heating element, which may be damaged and such damage
will not be covered by the warranty.
30
31
2700_2701_2702_2703_2704_2705_KL_0313.indd 30
2013-04-25 10:18:02