AUTOMATIC COOKING MODES
1. Fries
2. Chicken
3. Nuggets
4. Fish
5. Roast
6. Vegetables
7. Cake
BEFORE FIRST USE
1. Remove all packaging material.
2. Remove any stickers or labels from the appliance.
3. Do not remove silicon pads of the grid.
4. Wash the bowl, water tank and removable grids thoroughly with
warm water, a little washing-up liquid and a soft sponge. The bowl
and grids are dishwasher safe.
5.
WARNING:
The water tank is not dishwasher safe.
6. Wipe the inside and outside of the appliance with a damp cloth. The
appliance works by producing hot air or steam. Do not fill the bowl
(E) with oil or frying fat.
PREPARING FOR USE
1. Place the appliance on a flat, stable, heat-resistant work surface
away from water splashes.
2. Do not fill the bowl with oil or any other liquid.
3. Do not put anything on top of the appliance. This disrupts the airflow
and affects the hot air frying result.
The appliance can cook a large range of recipes. Cooking times for
the main foods are given in the section ‘Cooking Guide’.
Using the automatic cooking modes
1. Connect the power supply cord to an electrical socket.
2. Place the food in the bowl.
Note: Never fill the bowl beyond the MAX level mark or exceed the
maximum amount indicated in the table (see into section ‘Cooking
Guide’), as this could affect the quality of the end result.
3. Slide the bowl back into the appliance.
Caution:
Do not touch the bowl during use and for some time
after use, as it gets very hot. Only hold the bowl by the handle.
4. Press on the touchpanel screen the key of the desired cooking
mode (these modes are described in detail in the “Cooking guide”
section).
5. Confirm the cooking mode by pressing the Start button . This
will launch the cooking process.Cooking starts. The selected
temperature and remaining cooking time will alternate on the on-
screen display.
6. Excess oil from the food is collected in the bottom of the bowl.
7. Some foods require shaking halfway through the cooking time
(see ‘Cooking Guide’). To shake the food, pull the bowl out of the
appliance by the handle and shake it. Then slide the bowl back
into the appliance and press Start button again to restart cooking.
8. When you hear the timer sound, the cooking time set has finished.
Pull the bowl out of the appliance and place it on a heat-resistant
surface.
9. Check if the food is ready.
If the food is not ready yet, simply slide the bowl back into the
appliance and set the timer for a few extra minutes.
10. When the food is cooked, take out the bowl. To remove food, use
a pair of tongs to lift the food out of the bowl.
Caution:
The bowl should never be turn up side down with the
grid.
After hot air frying, the bowl, the grid and the food are very
hot. Depending on the type of food cooked in the appliance, be
careful as steam may escape from the bowl.
11. When a batch of food is ready, the appliance is instantly ready for
preparing another batch of food.
NOTE: The following cooking programs cook with steam.
Fill in the water tank to the maximum level with water before
launching one of this cooking program. We recommend to use
purified water.
Using the air frying mode
1. Place the food in the bowl.
2. Slide the bowl into the appliance.
63
62
