• WARNING: Do not use the blender if the lid is not in place.
• Do not use the blender without ingredients or solid ingredients only.
USING YOUR APPLIANCE
Using the blender (C)
• Correctly position the seal
(C3)
on the blade
(C2)
(Fig. 1).
• Clip the blade
(C2)
on the blade support
(C1)
(Fig. 2)
• Place the blade assembly
(C1, C2, C3)
on the jug
(C4)
and lock it by
turning the blade anti-clockwise (Fig. 3).
• Put the ingredients in the assembled jug without exceeding the maximum
level indicated:
* 1.25 L for thick preparations
* 1 L for liquid preparations
• Warning: Do not process boiling liquids (over 80ºC/176ºF) in the
blender jug.
• Lock the lid
(C5)
on the jug. Place the measuring cap
(C6)
in the lid
opening (Fig. 4).
• Place the assembled jug
(C)
on the motor unit
(A)
. The open lock is
aligned with the arrow on the jug (Fig. 5 - position 1).
• Then turn the blender jug
(C4)
a quarter turn until the closed lock is
aligned with the arrow of the jug (Fig. 5 - position 2).
• Plug in the unit and turn it on by turning the speed selector to the desired
position or apply a few pulses. To stop the blender, return to position 0.
• 2 positions are possible for the jug handle to the right or to the left of the
motor unit.
• Do not use the blender
(C)
continuously for more than three minutes. Wait
a few minutes before switching it on again. Do not use one of the blender
accessories
(D, E)
continuously for more than 30 seconds.
Using the herb chopper (E) or spice mill (D)
• The herb chopper
(E)
allows you to chop ingredients such as herbs, nuts,
onions, garlic, and dried fruit in a few seconds and prepare breadcrumbs.
• Do not use the herb chopper
(E)
for processing hard spices or ice cubes.
• The spice mill
(D)
allows you to chop of spices in a few seconds: coriander
seeds, peppercorns, coffee beans, etc.
• Do not use the spice mill and the herb chopper for liquid preparations (fruit
juice, etc.)
• These accessories come with a bowl
(D3, E2)
which prevents access to
the blades during use.
1. Turn the bowl
(D3, E2)
upside down and add the ingredients.
2. Correctly position the seal
(D2)
on the blade
(C1)
(Fig. 5).
Clip the blade
(D1 or E1)
to the blade support
(C1)
(Fig. 6).
Place the blade assembly
(C1, D1 or C1, E2)
on the bowl
(D3 or E2)
and
lock it by turning the blade clockwise (Fig. 7).
3. Turn over the assembled accessory
(D or E)
and position it on the motor
unit. The open lock is aligned with the arrow on the bowl
(Fig. 8 - position 1).
45
Содержание Blend Force LH4201S0
Страница 1: ......
Страница 50: ......
Страница 51: ......
Страница 52: ...Ref code 8020003081 SE JG LH4358S0 LH4201S0 191218 REF 8020003081...
