OBH Nordica 7097, Инструкция по эксплуатации

Страница: 29 / 36

29
Use the handheld vacuum cleaner to suck up dust and dirt from the floor and
tables, furniture, mattresses, cloths and carpets. You can also use it to remove
cold ash from the fireplace. However, it is important to make sure that there are
no sparks or embers in the ash as this might cause self-ignition. Such damage
is not covered by the warranty.
Description of the vacuum cleaner
1. Container
2. Button for releasing
the container
3. Lamp (on during charging)
4. On/off button
5. Motor part
6. Battery cover
7. Rubber nozzle for wet
vacuum cleaning
8. Cyclonic wet and dry
filter
9. Filter
How to mount the adapter to a wall fitting
When delivered, the adapter is mounted in the wall fitting, but if the adapter
plug has fallen out, just follow the following instructions:
1. Mount the small adapter plug on the top of the wall fitting.
2. Turn the plug 90° to keep it in place.
Wall mounting
The handheld vacuum cleaner is designed for wall mounting in the wall fitting.
Use a 5 mm drill to drill holes for the screw anchors, insert them in the wall and
finally turn the screws until the screw head is about 5 mm from the wall. The
wall fitting can now be mounted on the screws as illustrated below. Turn the
screws to fix the fitting.
Charging
The handheld vacuum cleaner has not been charged at delivery and needs
charging for at least 16 hours before use.
Use the delivered adapter for charging. Connect only to 230V AC as indicated
on the data plate on the adapter.
The charging should be made in a room at temperatures from about 8-40°C
and should be done exclusively by means of the delivered adapter. During
charging the adapter becomes hand-warm, which is quite normal.
1
1
2
3
4
5
9
8
7
6
7097_IDV_UVN_1015.indd 29 2015-10-16 11:28:45