OBH Nordica 6496, Инструкция по использованию

Страница: 29 / 36

You are welcome to visit our website www.obhnordica.se for inspiration and
further information about our products.
Before use
Bring the water to boil at least twice and pour out the water. Let the kettle cool
for 3-4 minutes between every boiling.
NOte!
The kettle comprises a lockable safety lid to prevent burn injuries, since
the lid cannot get loose in case the kettle should overturn. Open the lid by
pressing the button of the lid. Remember always to press down the lid properly
after filling of water.
WARNING! If yOu Add tOO much WAteR IN the kettle (I.e.
ABOVe the mAX mARkING), WAteR mAy BOIl OVeR ANd SplASh
Out. the mAXImum leVel Of the kettle IS 1.6 lItReS ANd thIS
quANtIty muSt NeVeR Be eXceeded. NeVeR ActIVAte the
kettle WIthOut WAteR.
The kettle consists of two parts: the kettle itself and the loose conductive
base that can be positioned in any angle. The kettle can only be used with
the delivered conductive base. You may wind up a part of the cord under the
conductive base and make sure that the cord is always as short as possible in
order that children do not grab it.
How to use the appliance
Plug to a wall outlet and position the kettle with water (at least up to the MIN
marking on the water level indicator) on the conductive base. Make sure that
the lid of the kettle is closed. The display goes on and then shows the actual
water temperature. Press the On/Off button on the handle to switch on the
kettle. 4 temperature points go on alternately in the display to indicate that
the water is heating. The temperature increase up to 100°C can be followed
on the display. When the water has reached 100°C, the kettle switches off
automatically and you will hear a beep.
If you want to heat the water to another temperature, press the temperature
button (marked with a thermometer icon) until the wanted temperature is
displayed (37°C, 60°C, 80°C, 90°C). The chosen temperature is marked by a
dot under the temperature marking on the handle. Note that you have to fill
the kettle with 1 litre of water to reach the 37°C setting. Next, start the kettle
by means of the On/Off button on the handle and the water is heated to the
chosen temperature, after which you will hear a beep sound and the reached
temperature will be displayed. Subsequently, the kettle turns off automatically.
how to keep the water hot
If you first want to heat the water and then switch to keep warm function,
first choose temperature (60°C, 80°C or 90°C) by means of the heat-keeping
button (marked with a steaming kettle) and next start the heating by means
of the On/Off button. When the chosen temperature has been reached, the
29
6496_KK_UVN_0215.indd 29 2015-04-29 10:23:43