![OBH Nordica 4951 Скачать руководство пользователя страница 51](http://html1.mh-extra.com/html/obh-nordica/4951/4951_user-manual_3150521051.webp)
51
Setting the alarm
The radio-controlled alarm clock comprises two alarms that are set in the
following way:
1.
Press the ALARM button (D) for 3 seconds until the number of hours
for Alarm 1 starts to flash.
2.
Set the hours by means of the [+] and [-] buttons at the wanted time.
3.
Press shortly the ALARM button and the number of minutes starts
flashing. Set the minutes by means of the [+] and [-] buttons at the
time wanted.
4.
Press the ALARM button again and the number of hours of Alarm 2
starts flashing.
5.
Set the hours by means of the [+] and [-] buttons at the wanted time.
6.
Shortly press the ALARM button again and the number of minutes of
Alarm 2 starts flashing. Set the minutes by means of the [+] and [-]
buttons at the wanted time.
7.
Pres the ALARM button again to confirm the settings. The display
reverts to normal reading.
By pressing the ALARM button once, Alarm 1 will be displayed and by
pressing the ALARM button again, Alarm 2 will be displayed. When the
set time of alarm of Alarm 1 is displayed, press the [+] button to activate
Alarm 1. A clock icon will be displayed above “A1” at the top to the right
side of the display.
ALARM 2 is set and activated in the same way as Alarm 1; however ”A2”
will be displayed instead of ”A1”, when the time is set and the alarm
activated.
When the wanted alarm time is in, the alarm will sound. If it has not
been switched off, the alarm will be on for about 2 minutes, gradually
increasing the sound level. After that period of time, the alarm stops by
itself and goes again 24 hours later. However, you can also switch off
the alarm before it stops by itself by pressing the ALARM button. If you
subsequently press the [+] button to turn off the clock icon, the alarm will
be disconnected completely.
4951_UL_UVN_100214.indd 51
2/14/2014 1:18:52 AM