Maintenance Page
www.obaby.co.uk
INSTRUCTIONS FOR SAFE USE & MAINTENANCE
1. Always place your crib on a stable horizontal surface
2. Do not allow young children to play unsupervised in the vicinity of the crib.
3. When your child is left unsupervised in the crib, always ensure the crib is locked in the fixed position.
4. Do not use the crib if any parts are broken or missing.
5. When a child is able to sit, kneel or pull itself up unaided, the crib should not be used for
that child any more.
6. All assembly fittings for the crib should be tightened properly.
7. Special care should be taken to ensure that no screws are loose, as this could cause a child to trap
parts of their body or clothing, which could pose the risk of strangulation.
8. Do not use the crib body without the frame.
9.
The thickness of the mattress chosen should be such that the internal height
(distance from the upper surface of the mattress to the upper edge of the crib side) is a
minimum of 200mm. The upper surface of the mattress must not exceed the line engraved
in the crib end.
10.
For reasons of safety we recommend the use of the O Baby crib mattress size 85 x 43cm.
11.
Do not place your crib in close proximity of an open fire and other sources of heat such as
radiators, electric or gas fires.
12. Your crib may be cleaned with a damp cloth. The occasional use of silicon wax polish will maintain
the good looks of your crib. DO NOT USE ABRASIVES OR BLEACH.
13. Do not use replacements parts that are not recommended or supplied by O Baby. Non approved
parts may render the repair or crib unsafe.
Due to constant updating and improvements, some components may occasionally differ slightly from the images shown in these instructions.
Any spare components should only be thrown away after you have FULLY constructed your product.
We reserve the right to change the specifications of any product without prior notice.
