OBaby Lincoln Sleigh Cot Bed, Инструкция по эксплуатации

Страница: 2 / 12

www.obaby.co.uk
Your child’s safety may be affected if you do not follow these instructions.
WARNING: A child’s safety is your responsibility.
WARNING: Do not use more than one mattress in this cot bed.
WARNING: Do not use the child’s bed near heat sources, windows and other furniture.
WARNING:
WARNING: Do not use this child’s bed if any part is broken, torn or missing. Use only
spare parts approved by the manufacturer.
WARNING: Do not leave anything in the cot bed or place the cot bed close to an
other product, which could provide a foothold or present a danger of
suffocation or strangulation, e.g. strings, blind/curtain cords etc.
We recommend you use the Obaby Mattress Size 140 x 69cm for this cot bed.
The thickness of the mattress chosen should be such that the internal height (surface
of the mattress to the upper edge of the cot frame) is at least 500mm when the base
is set in the lowest position and a minimum of 200mm when the cot base is set in the
highest position.
The mattress should be no more then 30mm shorter or narrower than the internal
length or width of the cot bed.
One end of the cot bed has a mark indicating the height of the mattress. The
thickness of the mattress used with this cot must not reduce the internal depth (from
mattress surface to top of side) to less than 500mm with the base in the lowest
position, or 200mm with the base in the highest position.
Thank you for choosing Obaby. This cot bed conforms to BSEN 716-1 & 2:2008 and
BS 8509:2000 + A1:2011. To ensure that your cot bed is used in accordance with
these instructions, please read them fully.
Safety Warnings
2