7 of 8
BOTTLE FILLER ASSEMBLY WITH CHILLER
Wall mounting frame
secures into wall with
face flush to finished wall
Upper front panel
mounts to frame with
bottom screws provided
Cradle mounting
angles (2 provided)
Cooling Unit Mounting Cradle.
FIRST: Secure cradle mounting angles to
frame rear flange using 4 screws provided.
SECOND: Slide cradle between angles and
attach to angles with 4 screws provided.
See assembled Mounting Cradle next page.
Cooling Unit (optional)
mounts inside cradle
Lower Front Panel
mounts to frame with
bottom screws or
optional locks
(2 provided)
Optional
VersaFilter III
Drip Tray Grille
(assemble last)
Reveal Gasket slides back
into ¼”[6] opening
5/16-18 nuts & washers and
¼-20 x ½” bolts & washers
supplied
(to secure fountain to frame)
Drip Tray
(DO NOT FASTEN TO FRAME)
