OWNER’S MANUAL
| OASIS SERIES 3000 WASTEWATER TREATMENT SYSTEM | 15
INSTRUCTIONS
FOR CONTROLLER
Introduction
The Oasis Clearwater Control Panel has
a number of features that are explained
in this section. The basic purpose of the
Control Panel is to activate and control
the functioning of the Treatment Plant’s
air pump and to register an alarm when it
detects a fault in the system.
General
Your Oasis Clearwater system is designed
to operate automatically and its operation
will usually be event free. The Control
Panel provides visual and audible
indicators of both normal operating
conditions and fault conditions. The
illustration above provides description
markers that correspond with the
following description of their operation.
A. POWER OFF/ON.
Located on
seperate housing. Once your
Oasis Clearwater system has been
commissioned, this switch must
remain ON at all times.* If it is turned
OFF no treatment will take place and
no alarms will function.
B. DISPLAY.
This display describes
normal and abnormal conditions by
using labeled fault lights. See later in
this document to understand their
meaning.
C. MUTE ALARM.
This is a ‘soft touch’
key that when pressed, silences the
audible alarm for a period of
24 hours.
D. STROBE LIGHT.
This is a high
intensity red light, mounted on the
top of the Control Panel, that flashes
in unison with the audible alarm to
make you aware of a fault condition.
Holiday Mode
This function should NOT be accessed by
the Home Owner. The controller has an
automatic holiday mode. If the irrigation
pump has not discharged for 48hours,
the controller will automatically enter a
holiday mode.
In Holiday mode power is supplied to the
blower for an adjustable On Time every
30 minutes. This On Time is adjustable via
a pot on the PCB (refer to right). This pot
will allow the On Time to be between 5
minutes on (turned fully anti-clockwise) to
30 minutes on (turned fully clockwise).
The holiday mode is automatically
disengaged once the irrigation pump
starts again. The dip switches on the PCB
allow the holiday mode to be engaged
automatically (the default position), or
permanently i.e. the blower always runs
in holiday mode no matter what the flow,
or never i.e. the holiday mode is never
engaged.
Audible Alarm and how to Silence It
To silence the audible alarm, press the
Soft Touch Mute Alarm key (C) briefly
once. This will silence the alarm for 24
hours. Should another fault occur while
the alarm is muted, a new alarm will
sound. If the faults are not rectified, the
alarm will sound again at the expiration
of 24 hours as a reminder that the plant is
not operating correctly.
The visual alarms cannot be turned off
until all faults are rectified.
Introduction
The Oasis Clearwater Control Panel has
a number of features that are explained
in this section. The basic purpose of the
Control Panel is to activate and control
the functioning of the Treatment Plant’s
air pump and to register an alarm when it
detects a fault in the system.
General
Your Oasis Clearwater system is designed
to operate automatically and its operation
will usually be event free. The Control
Panel provides visual and audible
indicators of both normal operating
conditions and fault conditions. The
illustration above provides description
markers that correspond with the
following description of their operation.
A. POWER OFF/ON.
Located on
seperate housing. Once your
Oasis Clearwater system has been
commissioned, this switch must
remain ON at all times.* If it is turned
OFF no treatment will take place and
no alarms will function.
B. DISPLAY.
This display describes
normal and abnormal conditions by
using labeled fault lights. See later in
this document to understand their
meaning.
C. MUTE ALARM.
This is a ‘soft touch’
key that when pressed, silences the
audible alarm for a period of
24 hours.
D. STROBE LIGHT.
This is a high
intensity red light, mounted on the
top of the Control Panel, that flashes
in unison with the audible alarm to
make you aware of a fault condition.
Holiday Mode
This function should NOT be accessed by
the Home Owner. The controller has an
automatic holiday mode. If the irrigation
pump has not discharged for 48hours,
the controller will automatically enter a
holiday mode.
In Holiday mode power is supplied to the
blower for an adjustable On Time every
30 minutes. This On Time is adjustable via
a pot on the PCB (refer to right). This pot
will allow the On Time to be between 5
minutes on (turned fully anti-clockwise) to
30 minutes on (turned fully clockwise).
The holiday mode is automatically
disengaged once the irrigation pump
starts again. The dip switches on the PCB
allow the holiday mode to be engaged
automatically (the default position), or
permanently i.e. the blower always runs
in holiday mode no matter what the flow,
or never i.e. the holiday mode is never
engaged.
Audible Alarm and how to Silence It
To silence the audible alarm, press the
Soft Touch Mute Alarm key (C) briefly
once. This will silence the alarm for 24
hours. Should another fault occur while
the alarm is muted, a new alarm will
sound. If the faults are not rectified, the
alarm will sound again at the expiration
of 24 hours as a reminder that the plant is
not operating correctly.
The visual alarms cannot be turned off
until all faults are rectified.
A
B
C
D
