Oasis Aquatics Oasis SE Series, Инструкция по установке и эксплуатации

Страница: 7 / 20

SE SERIES SINGLE-ELEMENT CARTRIDGE FILTER INSTALLATION AND OPERATION MANUAL Page 6 of 19
3. HOW IT WORKS
Oasis Aquatics SE Series Filters utilise multiple reusable, reinforced polyester filter cartridge elements
to provide a high degree of water clarity and long filter cycles with minimum care.
With maximum flow ratings between 380 and 455 litres per minute (LPM), they are designed for continuous
or intermittent operation, when installed both above or below the pool waterline.
Oasis Aquatics SE Series Filters are compatible with freshwater, saltwater and mineral pools and spas.
4. INSTALLATION
The filter should be installed as close to the pool as possible while keeping a minimum distance of 1.5m
away from the waters edge. Locate the filter on clean, rigid and level surface, preferably in a dry, shaded,
and well-ventilated area.
Prior to installation take into consideration the following conditions:
•
Position of suction and return PVC connections
•
Access for cleaning operation and servicing, particularly important if installing under a deck or roof
structure that enough space is provided to remove the element for cleaning
•
The operation of the air relief which discharges water from the filter, you must position the filter in
a way which witch prevents this water from reaching any electrical equipment which would present
a risk of electric shock or electrocution.
•
Protection from sun, rain, splashing etc
•
Drainage of mounting area, ensuring that it does not flood when it rains, or when the filter is
serviced.
•
Ventilation and protection of the full filtration system from any chemical fumes or spills.
1. Place the complete filter assembly in position.
a. Position filter body such that all operation and safety labels are visible.
b. Ensure that the mounting position is level and stable.
2. Do not locate electrical equipment over or near filter.
3. Ensure that water discharge from the air relief valve will not reach any electrical equipment when
the filter is bled.
4. Make sure that there is ample room above and around the filter to allow clear access for regular
maintenance activities.
5. Connect the pool suction PVC pipe plumbing between the skimmer, the pool outlet (from the pool),
and the pump.
6. Install the plumbing from the filter to the pool (return to the pool)
REQUIRED CLEARANCE
Model A B C
cm cm cm
SE100 82.7 47 30
SE150 91.2 47 30
SE200 103.4 47 30