![background image](http://html1.mh-extra.com/html/oase/lunagard-20/lunagard-20_directions-for-use-manual_3129102014.webp)
14
Installing the Lunagard on a surface:
The housing has two holes for fixing the garden light to a surface such as a wall or
a post.
1. Remove front screen (
2
) by pressing in the two pressure clips at the side (
13
)
and unscrewing it.
2. In a stone or concrete wall, drill two holes 11 cm apart. Use the appropriate
rawlplugs and screws (Screw diameter= 5 mm, min. length= 5 cm).
3. Put the roller (
14
) in the desired area of illumination with the screw ring (
1
).
4. The connecting lead (
18
) can either be fed through the cable opening at the
front or the back. To do this, pull out the cable screen at the front (
19
) or the back
(
20
). Please retain the cable screen in case you need it later on.
5. Feed the connecting lead (
18
) through the strain release (
21
) and the relevant
cable opening on the underside of the housing (
17
).
6. Insert the screws through the housing (
17
) from the inside and screw the
housing to the wall or post.
7. Hook the two hooks (
15
) of the front screen (
2
) into the two slots (
16
) of the
housing (
17
).
8. Screw in front screen (
2
). Both pressure clips (
13
) must click into place.
Make sure that the roller (
14
) and the connecting lead are (
18
) correctly
positioned.
The screw ring (
1
)
must
lie completely in the “front” or “back” adjustable range!
The screw ring must not be jammed by the housing or the front screen (see
diagram)!
9. Connect the safety transformer to the mains in a dry place that is safe from
flooding. The distance between the safety transformer and the edge of the pond
must be at least 2 m.
10. Lay the connecting lead (
18
) of the garden light and connect it to the safety
transformer.
Your garden light is now operational.
GB
Operating instructions
GB
17
18
20
21
18 3
17
17
18
21
19
17
18
20
21
13
2
13
15
16
1
14
2
17
17
21
19
18
6. Connect the safety transformer to the mains in a dry place that is safe from
flooding. The distance between the safety transformer and the edge of the
pond must be at least 2 m.
7. Lay the connecting lead (
18
) of the garden light and connect it to the safety
transformer.
Your garden light is now operational.
Lunagard NEU.p65
24.10.2002, 12:44
14
Содержание Lunagard 20
