Oase FiltoClear 3400, Руководство по эксплуатации

Страница: 10 / 96

10
Symbols on the unit
Read the operating instructions.
Installation and connection
Installing the unit
To be taken into consideration for planning:
•
For operation at a swimming pond: Install the unit at a distance of at least min. 6.6 ft (2 m)
from the water.
•
For operation at a pond: You can install the unit directly at the edge of the pond.
•
Protect the pressure filter from direct sunlight.
•
Route the return to the pond so that the water is returned to the pond e.g. through a water
course. This enriches the water with additional oxygen.
•
Ensure that the inlet into the pond is max. 6.6 ft (2 m) above the filter lid.
Bury the pressure filter
A buried container is barely visible. The FiltoCap stone gray (art. no. 91645) cover for the filter lid,
available as an accessory, blends seamlessly into the pond landscape.
•
Dig a hole close to the pond and place the container in the hole down to the maximum em-
bedding depth.
•
Ensure that the ground is firm and horizontal.
FiltoClear Embedding depth h
3400 0.8 ft (0.24 m)
5200 1.2 ft (0.36 m)
8200 1.6 ft (0.48 m)