Oase FiltoClear 3400, Руководство по эксплуатации

Страница: 7 / 96

EN
7
1 Water inlet for the pond water being cleaned
•
Connection G2
2 Opening ring with locking screw for locking the UVC unit head
•
To remove the UVC unit head, undo the opening ring.
3 Water outlet for the clean pond water
•
Connection G2
4 UVC unit head with temperature monitor
•
The UVC clarifier shuts down when overheated and is automatically reactivated after cooling
down
5 Turning valve for switching between water outlet and dirt water outlet
Water filtration and UVC radiation
Cleaning foam filters
6 Dirt water outlet for dirt water when cleaning the foam filters
•
Connection G2
7 Indicator light for checking the function of the UVC clarifier
8 Cleaning handle
•
Pulling compresses the foam filters and removes dirt particles
9 Filter lid
10 Clamping ring for fastening the filter lid on the container
11 Marking for the max. embedding depth
12 Container
13 Cleaning rotor, cleans the quartz glass during operation
•
Only for FiltoClear 5200, 8200
14 Blue foam filter (10 ppi)
15 Red foam filter (30 ppi)
16 Purple foam filter (20 ppi)
17 Closing disk for filter sponges, is connected to both cleaning rods
18 Cleaning rod, connecting cleaning handle and closing disk
19 Meshed tube, maintaining the foam filter spacing to the UVC water casing
20 UVC water casing, conveying water to the UVC lamp
21 Spacer, connecting two spacer disks with each other
•
The spacer prevent the foam filters from being compressed by the weight of the foam filters
above them
22 Quartz glass with internal UVC lamp
23 Spacer disk, each positioned between two foam filters