Oase Bitron Premium 60 W, Пусконаладка

Страница: 34 / 284

34
Installation and connection
Distance from the pond
 B
The unit must be installed outside of the pond, but is protected against temporary flooding.
•
The unit head must be positioned so that it is usually dry.
•
Bitron 120 W / 180 W: The switch box must be installed at least 2 m from the edge of the pond.
Installing a UVC clarifier separately
 C
•
The UVC clarifier may only be installed horizontally pointing downward or vertically on a firm
base.
–
For horizontal installation, the inlet for pump connection must be at the bottom, so that no
air can accumulate in the water housing of the UVC clarifier.
–
Allow sufficient space for carrying out maintenance work. At least 600 mm of space must be
kept clear for dismantling and installing the unit head.
•
For installation below the level of the water, fit a slide valve in the water supply pipe so that
the unit can be partially or completely sealed off for controlling the flow or for performing
maintenance work.
–
Recommendation: Slide valve DN 110 (OASE art. 27171).
•
If the pump is installed at a dry location, the pressure-side and suction-side connection thread
must be sealed with Teflon tape.
Vertical installation of the UVC clarifier
Use suitable fastening material (screws, dowels) for assembly.
•
Select the fastening material so that the unit is stable. Take the weight of the water-filled
unit into account.
How to proceed:
 D
1. On the ground, mark the positions for the screws.
2. Drill holes and screw the unit to the ground.
3. Connect the inlet and outlet.
–
Assembly material, inlet (IN): OASE accessories 73751, 77191 and hose
∅
50 mm to the pump
–
Assembly material, outlet (OUT): OASE accessories 73751 for connection of pipe DN 110.
–
Secure pipe DN 110 against slipping.
4. Bitron Premium 120 W /180 W: Fasten the switch box on the water housing. (
→
Installing the
switch box)