Oase Bitron Gravity, Руководство по эксплуатации

Страница: 19 / 37

1
- GB -
D
K
− Check the O ring (13) on the unit head for damage and replace if necessary.
− Loosen the self-tapping screw (12) until the screw tip is inside the housing of the clamping ring (16).
−
Unscrew the clamping ring (16) by turning counter-clockwise.
− Pull off the quartz glass tube (15) including the O ring (17) with a slight rotary movement.
D L
− Carefully pull the UVC lamp (19) out of the lamp socket.
− Remove the lamp protection (18) and retaining plate (20) and fit them onto the new UVC lamp.
− Insert the new UVC lamp (19) into the socket at the unit head.
D K
−
Insert the quartz glass (15) with O ring (17) into the unit head (11) as far as it will go.
− Press the O ring (17) into the gap between the quartz glass (15) and unit head (11) with the clamping ring (16).
− Tighten the clamping ring (16) clockwise as far as possible.
− Tighten the self-tapping screw (12).
D M
− Reassemble the unit in the reverse order.
Storage/Over-wintering
If the system is operated in a frost protected filter shaft or room, it can remain in operation during the winter. It is the
responsibility of the user to ensure a minimum temperature of 4° C.
Systems that are not frost protected must be shut down when the water temperature goes below 8 °C or at the latest
when frost is expected.
How to proceed:
− Drain the unit as far as possible, clean thoroughly and check for damage.
− Empty all hoses, pipes and connections as far as possible.
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.
Disable the unit beforehand by cutting off the cables.
Only dispose of the UVC lamp by using the return system provided for this purpose.