![background image](http://html1.mh-extra.com/html/oase/biostyle-50/biostyle-50_operating-instructions-manual_720330008.webp)
8
Commissioning/start-up
NOTE
BioStyle 30 Thermo, 50 Thermo:
Fire hazard due to highly flammable material on hot surface.
f
Only switch on the heater when it is completely submerged in water.
L
If there is air in the telescopic intake, it may take up to 3 minutes for the pump to
deliver water.
x
Switching on:
Plug the power plug into the outlet.
–
The unit switches on immediately.
–
Lay the power supply cord so that a drip loop is formed and the lowest point is
below the socket. This prevents dripping water from entering the socket.
–
Set the desired flow rate.
x
Switching off:
Pull the power plug from the outlet.
Form drip loop
Adjust flow rate
BSE0024
BSE0013