12
Remove / install heater
You can remove or install the heater to
x
Retrofit your filter with a heater,
x
Thoroughly clean the filter housing,
x
Replace a defective heater.
Prerequisite:
x
The pump is removed.
BSE0008
Troubleshooting
Malfunction
Possible cause
Remedy
Pump does not start up
Insufficient power
Check the power supply
cord
Impeller unit blocked
Cleaning
Insufficient water flow
Filter housing or impeller dirty
Cleaning
Impeller unit worn out
Replace impeller unit
Filter media dirty
Replace filter media
Telescopic intake blocked
Clean telescopic intake
Telescopic intake and partition wall
not assembled correctly
Assemble telescopic intake
and partition wall correctly
Filtration insufficient
Filter media soiled or worn
Replace filter media
Filter housing clogged
Clean filter housing
Water heating insufficient
(only "Thermo" version)
Insufficient power for heater miss-
ing
Check the power supply
cord
Heater defective
Replace
