Oase AirFlo 230 V, Руководство по эксплуатации

Страница: 18 / 41

- EN -
18
Scope of delivery
Pos.

A AirFlo 230 V, 1.5 kW
AirFlo 400 V, 1.5 kW

B AirFlo 400 V, 4.0 kW Description
1 1 x 1 x Float
2 1 x 1 x Accessory kit containing fastening material
3 1 x 1 x Screw M12 × 16 mm
4 – 1 x Disc 90
1 x – Disc 110
5 1 x 1 x Protection grid
6 1 x 1 x O ring
7 1 x – Nozzle 120
1 x 1 x Nozzle 138
8 – 1 x Nozzle 150
9 1 x 1 x Operating instructions
10 1 x 1 x Propeller unit
11 1 x 1 x Riser pipe
Product Description
AirFlo 230 V, 1.5 kW / 400 V, 1.5 kW / 400 V, 4.0 kW is an aerator for supplying oxygen to ponds and lakes, and a
floating water fountain, which can create different spray patterns.
Intended use
Air Flo, referred to as "unit", may only be used as specified in the following:
• For aeration and supplying oxygen to garden ponds.
• For creating a water fountain.
• Operation under observance of the permissible water quality. ( → Water quality)
• Operation under observance of the technical data.
The following restrictions apply to the unit:
• Do not use in swimming ponds.
• Never use the unit to convey fluids other than water.
• Never run the unit without water.
Installation
The respective nozzle is fitted to achieve the desired spray pattern. The unit can make three different spray patterns.
(→ Overview of spray patterns )
Overview of spray patterns
The following nozzle/disc combinations are possible. Any other combinations other than those shown here are not per-
mitted:
Spray pattern effect I II III
AirFlo 230 V, 1.5 kW Nozzle 138 Nozzle 120 Nozzle 138 and disc 110
a [m] 2.5 4 6
b [m] 0.6 0.95 1.8
AirFlo 400 V, 1.5 kW Nozzle 138 Nozzle 120 Nozzle 138 and disc 110
a [m] 3.5 5.0 6.0
b [m] 0.8 1.0 2.0
AirFlo 400 V, 4.0 kW Nozzle 150 Nozzle 138 Nozzle 150 and disc 90
a [m] 6.0 8.0 10
b [m] 1.5 2.0 3.0
All dimensions are approximate reference values