- 11 -
LOG-BC
Installation and operation manual
EN
3. TECHNICAL SPECIFICATIONS
2. MAIN FEATURES
- Microprocessor logic
- Green LEDS displaying the status of the NO control inputs and red LEDS for the status of the NC safety ones
- Pull out terminal blocks
- Output for a flashing light and gate open indicator or for a red and green traffic light
- Integrated radio receiver 433Mhz; 2048 codes
The control unit denominated LOG-BC is designed to manage the PRIVEE automation and is equipped with encoder input for
learning the stroke and recognising the obstacle.
Thanks to the considerable amount of logic available even very particular operating conditions on sytems can be met.
1. INTRODUCTION
- Power:
230Vac ±10% 50/60 Hz 100W
- SCA output:
24Vac 3 W
- Flashing lamp output
24Vac 25Wmax
- Power supply output for
20 ÷ 26 Vac 12W max.
accessories
M1:
Power terminal board
M2:
Controls and safety devices terminal board
M3:
Motor terminal, transformer, +acc
SW3:
8-way Dip Switch
F2:
Power fuse 500mA 5x20
AP.PD:
Semi-automatic opening cycle
START:
Start and programming
PM1:
Pre-manoeuvre warning lamp flash time
PM2:
Chain dip
PM3:
Pause time
µ
P:
Microprocessor with flash memory
COSTA
PWR
OUT 2
ENC
FOTO
STOP
START
μP
AP.PD.
APRE
PR1
PR2
1
ON
2
3
4
5
6
7
8
DL1
CHIUDE
OUT 1
PM1
PM2
PM3 SW3 AP.PD
M1
M2
F2
START
M3
