11
CLEANING & DISINFECTION / INSPECTIONS / WARRANTY
CLEANING PROCESS
To reduce the risk of electric shock:
- Always unplug this furnishing form the electrical outlet before cleaning.
DANGER
INSPECTIONS
WARRANTY
Follow the cleaners/disinfectant manufacturers’ directions for use. Please note that cleaning and disinfecting the
PX150 & PX200 Beds is a two part process. First it must be cleaned of any visible soil, then it can be disinfected. The bed should be
cleaned as soon as possible after use. Please follow these procedures for best results:
1. Using a fresh wipe or wipes, clean any visible soil off of the bed, working from the top to the bottom of the bed.
2. Throw the used wipe(s) away.
3. Using a fresh wipe or wipes, thoroughly wipe all surfaces of the top and any high-contact areas such as handles,
handsets, etc., making sure they remain wet for the disinfectant manufacturer’s recommended contact time.
4. Throw the used wipe(s) away and allow the bed to dry.
RECOMMENDED REGULAR INSPECTIONS (monthly or local standard)
• Visually inspect components for obvious damage that could cause problems during operation.
RECOMMENDED PERIODIC INSPECTIONS (yearly or local standard)
• Visually inspect components for obvious damage that could cause problems during operation.
• Check that all fasteners are present and fastened securely.
• Clean unusual buildup of dirt on the bed and/or parts of the bed not normally cleaned on a regular basis.
• Check for tears or cracks in the coverings.
3 Years Parts, 2 Years Labor
