background image

17

SPECS

 &

 WARRANTY

SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

Designed For:

 

 North America 

       Europe 

     Japan/Korea

Voltage/Current
Input Frequency
Power Consumption 
Table Actuator Voltage
Electric Shock Protection
Mode of Operation

120 VAC/1.5 amps
60 Hz
180 watts 
24 VDC

220 VAC/0.8 amps
50 Hz
180 watts 
24 VDC

100 VAC/1.8 amps
50/60 Hz
180 watts 
24 VDC

Class I Equipment

 Continuous Operation 

@ 10% Duty Cycle

Class I Equipment

Continuous Operation @ 

10% Duty Cycle

Class I Equipment

Continuous Operation @ 

10% Duty Cycle

Storage & 

Transport

Temperature: 32º - 100º F   0º-38º C                 Humidity: 60% relative humidity                  Pressure: no limitations known

During transport, DO NOT stack containers.

U L 2601-1

C S A  C 22.2 N O .601.1

IE C   60601-2 (2001-09)

C

U S

 

L IS T E D

R

WARRANTY

For full warranty details, please visit www.oakworks.com

All warranties are limited to factory-provided replacement parts, factory repair or replacement, at the dis-

cretion of O

akworks

®

All warranties exclude damage caused by improper set-up, accident, abuse, misuse, neglect, use for other 

than intended purpose or reasonable wear such as tears in the upholstery. 
All warranties are invalidated by non-factory modifications and unauthorized repairs, which will imme-

diately terminate all liability by O

akworks

®

 for the product or damages caused by its use. 

The buyer and its customers shall be responsible for proper set-up and use of the products as well as 

any supervision required for safety. In no event shall O

akworks

®

 be liable for any special, indirect, con-

sequential, incidental, exemplary or punitive damages or costs. Use of non-approved cleaning solutions voids 

the guarantee on all fabrics.
The warranties set forth herein are the sole and exclusive warranties provided by 

Oakworks

®

. There are 

no other warranties, representations or guarantees provided by O

akworks

®

 either expressed or implied, 

including warranties of merchantability and fitness for a particular purpose. 

Warranty valid with proof of purchase. 

ETL Listed

Complies with:   UL 962, CAN/CSA C22.2 No. 68-09,  

Tested to:  

EN60335-1, EN60335-2-32

SPECIFICATIONS & WARRANTY

U L   2 60 1 - 1

C S A   C 22 . 2  N O . 6 0 1 . 1

I E C  6 06 0 1 - 2  ( 2 00 1 - 0 9 )

C

U S

L IS T E D

R

U L   2 60 1 - 1

C S A   C 22 . 2  N O . 6 0 1 . 1

I E C  6 06 0 1 - 2  ( 2 00 1 - 0 9 )

C

U S

L IS T E D

R

Содержание Clinician





















Отзывы: