To raise the
table, unfold
crank handle
until it locks
into position.
DIRECTIONS
FOR
USE
9
CAUTION
DIRECTIONS FOR USE
Foot Control
Operate the foot control as shown below to raise or lower the height of the table.
When operating the table’s controls, be sure to observe all cautions and warnings as
given in the manual.
ADJUSTING HEIGHT OF THE TABLE
(ELECTRIC/HYDRAULIC)
DAILY CYCLING
ADJUSTING THE HEIGHT OF THE TABLE
(MANUAL/HYDRAULIC)
When operating the
controls and making any and
all adjustments to the table,
move hands and feet away
from the working mechanism of
the table.
Risk of Injury – Children should
never be near the table when in
use. The table must be locked out
(use key lock) and controls stored
out of reach if there is any possibil-
ity that children would be near the
table when not in use.
DOWN
To move the table posi-
tion higher, press down
on the left side of the
foot control.
When operating the table’s con-
trols be sure to observe all cau-
tions and warnings given in the
manual to prevent injury to both
operator and client.
CAUTION
Foot Control: used to change height
The O
akworks
®
Clinician uses hydraulics and hydraulic fluids to adjust the table
height. Maintaining the quiet operation of your table requires that you fully cycle
your table (up & down) twice per day. Cycling of the table will maintain the
lubrication within the hydraulic cylinders for continued smooth and quiet opera-
tion. If daily cycling is not possible, we recommend that you cycle the table (up
& down) 7 times at least once per week.
Raise table
To fold handle out of the way, rotate until
the handle is at its lowest point, then pull
out slightly. Fold down under the table.
Note: Folding the handle when it is not at its
lowest point can damage the fabric around
the handle.
Turn crank clockwise to
raise table to desired height.
To lower the table, turn the
handle counter-clockwise.
Lower table
UP
To move the
table position
lower, press
down on the right
side of the foot
control.
