background image

10

DIRECTIONS FOR USE

When operating the table’s controls 
be sure to observe all cautions and 
warnings given in the manual to 
prevent injury to both operator and 
client.

OPERATING THE MANUAL TOP  (IF EQUIPPED)

To Raise the Back Rest:

 

Raise the back rest by pressing the lever under the head 

section and lifting up to the desired height. It is recommended that clients take some of 

their weight off the back rest while you lift. 

To Lower the Back Rest: 

Press the lever under the head section and push the back 

rest down. Release the lever and the back rest will stay in place.

To Change Position of the Back Rest Lever: 

The back rest lever can be moved 

to the opposite side of the back rest by removing the screws and relocating the hand 

lever to the opposite side of the top into the four pre-drilled holes. See Back Rest Lever 

photo at left for screw locations

Do not sit on the elevated  

Back Rest or Leg Rest. 

CAUTION

DIRECTIONS

 FOR

 USE

Back Rest 

Control

BACK REST

LEG REST

The leg rest adjustment lever is located on the side of the table under the seat section

To Change the Lever Position:

 

Remove the screws from the lever and replace just the 

screws. Move handle to the opposite side of the table. Remove the screws that are there 

and mount the lever. See Leg Rest Adjustment Lever photo at left for screw location.

To Raise the Leg Rest:

 

Raise 

the leg rest by pulling the lever on 

the side of the seat section and raise 

to the desired height with your other 

hand as shown. To make the adjust-

ment easier, it is recommended that 

clients take some of their weight off 

the leg rest while you lift.

To Lower the Leg Rest: 

Pull the 

lever on the side of the seat section 

and push the leg section down as 

shown. It is recommended that this be 

done with the client on the table as this 

weight will assist in lowering the leg 

section. Release the handle once leg 

rest is at desired location and the leg 

section will stay in place.

Back Rest Lever

Leg Rest

Adjustment Lever

Содержание Clinician





















Отзывы: