DIRECTIONS FOR USE
BUBBLE LEVELS
Bubble levels are installed on the handle end of the table to aid the operator in determining the horizontal plane.
ANGLE INDICATOR
Standard on CFLU401, CFUR401 and
CFUR301 Tables. Optional on all other
Imaging Tables.
To use angle indicator, simply press “on/off”
button on the left side of the indicator.
NOTE: Do not press “zero” unless table is
in the horizontal position.
CAUTION
PATIENT RESTRAINT STRAPS
Two Patient Restraint Strap must be used at all times during procedures to prevent
the patient from falling off the table.
The strap has hook and loop fasteners attached to the ends. The strap is attached as follows:
1. Place the center of each strap around the patient at
two
places. Relocate the straps as necessary for adequate clear-
ance.
2. Take the ends of each strap down around the tabletop.
Pull each strap snug underneath the table and press the two
ends together.
3. Check both straps to assure adequate patient restraint
prior to using the Trendelenburg functions.
17
