DIRECTIONS FOR USE
REMOVING TOP PAD
The top pad has been designed to be easily removable and replaceable with no tools needed.
Thumb Screw Locations (4 per side)
1. Unscrew the thumb screw clockwise until the thumb screw is completely
removed. Repeat for all 8 thumb screws. If the thumbs screws are on too
tight, a 3/16” bit can be used.
2. Lift top pad off the platform.
IF THE TABLE HAS A HEATED TOP:
Unplug the table from the wall outlet and disconnect the wires circled from the control box located under the
platform. Pull the cables through the platform before completely removing the top pad.
TO REMOVE THE TOP PAD:
The top pad is attached to the platform with 8 thumb screws located below the platform as shown.
Heated Top Cables
16
