Oakcastle SB100, Инструкция по эксплуатации, Страница: 9 / 26

7
EN
Basic Operation
Instruction Guide
Selecting a channel
Follow one of the methods below to switch channels.
1. Press up or down on the navigation controls ( Ref.11 / Ref.14 ) to
move to the next or previous channel.
2. If you already know the channel number, enter the number using
the number keypad ( Ref.20 ) and then press OK ( Ref.13 ) or wait for
2 seconds.
3. Press OK (
Ref.13
) on the remote control. This will display the
channel/radio station list. Press up or down until the channel you
want is highlighted, and then press OK (
Ref.13
).
4. Press the EPG button (
Ref.33
), select the channel you want from
the list, and press EPG ( Ref.33 ) again.
• NOTE: Press the RECALL button ( Ref.21 ) to return to the last
channel or station played.
Selecting a radio station
1. Press TV/RADIO (
Ref.36
) to enter radio mode, then enter the
number. (For example, 201 is the number for ABC Jazz).
2. Press OK ( Ref.13 ) to display the station list. Press up or down until
the channel you want is highlighted, and then press OK (
Ref.13
).
NOTE: The STB uses the Logical Channel Numbering system (LCN) by
default. Secondary channels can be selected by pressing the primary
number followed by another number. (For example, pressing 2 gives
you ABC1, and pressing 22 gives you ABC2).