Oakcastle SB100, Инструкция по эксплуатации

Страница: 21 / 26

19
EN
Factory Reset and Software Update
Instruction Guide
Clearing and resetting data
You can reset the STB by restoring the unit to the default settings it had
when it left the factory (please see following section for instructions).
This clears all channels, stations, preferences and other user settings.
You will need to rescan for channels and stations before you can
continue watching digital TV or listening to digital radio.
WARNING: This procedure returns the STB to its default factory settings.
All data (such as time zone, channels, stations and timers) will be lost.
1. Press MENU ( Ref.10 ) on the remote control to see the Main Menu.
2. Scroll across to ‘System’ on the menu, then press up or down ( Ref.11 /
Ref.14
) until you have selected ‘Restore Factory Default’. Press OK
( Ref.13 ).
3. A warning message will appear, asking you if you are sure you want to
clear all services and reset all settings. To continue, press OK (
Ref.13
). To
cancel, press EXIT ( Ref.4 ).
Software Update
To update the software, please select ‘FTP Download’ under ‘USB’,
‘Network Apps’ in the menu.
However, if required to update the software manually, you can
download the software to your PC and then transfer it to your STB. You
will need a USB memory stick (not supplied with the STB).
1. Once you have obtained an upgrade file, transfer it to a USB memory
stick. You need to place the file at the root (or top) level on the memory
stick, not inside a folder or directory.
2. Insert the stick in the USB port. Press MENU (
Ref.10 ) on the remote
control, and select Software Update from the System section.