10
To insert the battery
Line up the battery’s exposed copper contacts with the connectors inside the
battery compartment. Insert the contact’s side of the battery first and then gently
push the battery into place. Replace the back cover.
Charging the battery
Before you start using your Xda Ignito, you’ll need to fully charge the battery.
Charge the battery by plugging in the AC adapter plug to an electrical outlet.
Plug the USB end to the sync connector port at the bottom of your Xda Ignito.
The battery will be fully charged after about 3 hours of charging.
9
Switching on your Xda Ignito
After inserting your SIM card and charging the battery, just press and hold the
Power
button for a few seconds.
A Quick Start Wizard will guide you through the calibration of the screen and
the set up of regional settings, date and time and password. Simply follow the
onscreen instructions to finish the Quick Start Wizard. After the Quick Start Wizard
finishes, your Xda Ignito will install the customisation settings, then restart.
Note:
After your Xda Ignito restarts, you may be asked to set up an email account.
