GEM, MIRRIORED AND TUMBLED GLASS MEDIA PLACEMENT
GEM, MIRRIORED AND TUMBLED GLASS MEDIA PLACEMENT
A.
Carefully inspect the carton for shipping damage. If any parts are missing or damaged, call your dealer.
Do not attempt
to install the appliance unless all parts are in good condition.
B.
Correct
installation
is
crucial
to
safe
performance
of
your
Outdoor
Fire
Pit.
Due
to
high
temperatures,
the
Fire
Pit
must
be
located
out
of
traffic
areas
and
away
from
combustibles.
C.
Page
7
Pour the glass gem / tumbled glass media into the
Outdoor Fire Pit so that the burner is completely covered.
(See Figure 1 and 2
Figure 1.
Place the largest log diagonally
centered over the burner.
Figure 2.
Place the larger three logs as
desired using the largest log as
the support.
Figure 3.
Place the balance of the logs as
desired. Make sure to leave
enough air flow.
CERAMIC LOG MEDIA PLACEMENT
Pour the lava granules into the Outdoor Fire Pit so that the burner
is completely covers the burner by 1/2" and spread evenly.
(See Figure 1, 2 and 3)
Figure 1.
Pour the first bag of the glass media
into the burner support.
Figure 2.
Pour the additional bags of media onto the
burner support. Spread the media evenly
covering the burner.
CAUTION: BURN HAZARD. FIRE PIT MEDIA
WILL REMAIN HOT FOR SOME TIME AFTER USE.
YOU MUST MAINTAIN THE LAYOUT AS SHOWN TO ENSURE PROPER OPERATION OF YOUR FIRE PIT.
IF YOU NEED TO REPOSITION ANY MATERIAL TO MAINTAIN THE PROPER LAYOUT, USE HEAT
RESISTANT GLOVES OR ALLOW MATERIAL ADEQUATE TIME TO COOL BEFORE HANDLING.
