Nyos OPUS 300, Инструкция по эксплуатации

Страница: 6 / 36

ASSEMBLY
VIDEO INSTRUCTIONS FOR
AQUARIUM ASSEMBLY
ASSEMBLY INSTRUCTIONS:
• At least 2 persons with sufficient physical strength are
required for assembly
• Tools required: Phillips screwdriver, scissors for silicone
cord
• Ready an underlay for intermediate placement of the
aquarium (e.g. carpet, towel)
• Do not use blades to remove the protective film or open
boxes, because these can scratch the aquarium, cabinet
or doors
STEP 1: SELECTION OF THE INSTALLATION SITE
• The floor on which the OPUS
®
300 is installed must be
level.
• The floor on which the OPUS
®
300 is installed must be
sufficiently load-bearing. The OPUS
®
300 has a base
surface of approx. 98x66 cm (38.6 x 26 in) and a weight
of approx. 500kg (1,100 lbs) when filled. In case of doubt,
consult a structural engineer in this regard.
• The aquarium should not be exposed to direct sunlight
because this can result in undesirable algae forming.
• The room should exhibit a normal room temperature of
approx. 20 – 24 °C (68-75°F).
• Do not install next to a radiator or an air conditioning
system.
6