25
1.
Ensure that the WaterMe base is securely fi xed to the wall then place the exterior housing onto the base. Make sure the
indication lights are positioned so all are visible through the allocated holes on the external housing.
2.
Place the 4 stainless steel exterior housing screws through the allocated holes.
3.
Using a phillips head screw driver, tighten the 4 stainless steal screws to the rear housing. Turn the screws in a
clockwise direction to tighten.
Caution
•
Do not force placement of the front housing onto the base of the controller. The front housing is designed to slide
easily in position through guided areas.
•
Tighten the 4 screws securing the front cover. The screws should be tightened enough to ensure that the external
O-ring is compressed.
!
1
2
3
Mounting the Front Housing
SECTION 5.0
