Tips prior to using grill
•
Be sure all Control Knobs are set to “OFF” and open the Grill Lids.
•
Have your assistant stand behind the right side of the grill and look toward the front of the grill. Never place your face inside the Grill.
•
Press the Igniter Cap, You should hear a “clicking” sound. Your assistant should see a blue spark within each Gas Collector Box.
If a spark is present Electrode Tips are properly positioned.
•
If no spark is seen, the Spark Gap needs to be adjusted as follows:
a)
If you’re not able to see a spark, the Spark Gap Electrode Tip and Receiver is more
than 0.47 cm/ 3/16 in. off use long nose pliers to gently squeeze the Gas Collector Box to the
narrow gap.
b)
Recheck the Electrode again, if no “clicking” sound is heard; AA Battery is installed
backwards.
c)
Electric wires may be loose. Remove the AA Battery and inspect the Ignitor Junction
Box found behind the Control Panel and reconnect any loose wires.
Latch
!
WARNING
!
Failure to read and follow the Use and Care Instructions could result in a fire or explosion that could
cause serious bodily injury, death or property damage.
Transporting or storing your grill:
1.
Lock grill casters.
2.
Remove LP Gas tank and Grease Tray from your grill.
3.
Loosen 4 Latches on Grill Bowl and Cart. With an assistant. Lift and position Grill Bowl on a
cardboard surface.
4.
Lift up the 4 connect bracket shown on Fig.2 with your finger, then have the cart folded.
5.
With an assistant, lift and position Grill Bowl onto the folded Cart. See Fig.3.
6.
Then lock the Grill Bowl and Cart as Fig.4 shown.
Fig.1
Fig.2
Fig.3
Fig.4
10