NXP Semiconductors UM11712 Скачать руководство пользователя страница 17

NXP Semiconductors

UM11712

PCAL6534EV-ARD evaluation board

6.2 Using the PCAL6534EV-ARD with an LPCXpresso55S69 development

board

Figure 7

 shows the required hardware for operation of the PCAL6534EV-ARD and

LPCXpresso55S69 EVK board. This configuration consists of:

One LPCXpresso55S69 EVK board

One PCAL6534EV-ARD daughterboard

One USB-A / USB Micro-B cable

A PC with Windows 10 operating system

The LPCXpresso55S69 development board is equipped with four USB Micro-B

connectors: P5, P6, P9 and P10. The board can be powered through any USB port.

Using P6 USB connector to connect the board to the PC simplifies the start-up operation

because P6 is designated for debugging and the USB cable thus accomplishes two tasks

at the same time: powering the board, and serving as a data link between the EVK board

and PC. For more details regarding power-up and operation of the LPCXpresso55S69

development board, see the 

LPCXpresso55S69/LPCXpresso55S28 Development Board

User Manual

 

here

.

UM11712

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2022. All rights reserved.

User manual

Rev. 1.0 — 31 January 2022

17 / 31

Содержание UM11712
































Отзывы: