NXP Semiconductors TWR-SB0410-36EVB, Руководство пользователя

Страница: 8 / 26

TWR-SB0410-36EVB tower system platform , Rev. 1.0
8 NXP Semiconductors
Getting to know the hardware
4.4 Board Description
Figure 4. Board overview
Table 2. Board description
Name Description
Reset button Resets the MC34SB0410 device
Four Regulated / PWM Valve Driver Outputs Current Regulated (or PWM) valves output up to 2.25 A, 5 KHz (or 5.0 A, up to 5 KHz)
Valves Power Provides supply to all valves connected
AGND Ground connector header
6.0 V to 36 V VPWR Supply Power supply for power stage
Motor Jumper Connect / disconnect the motor jumper for test
Secondary Connector Plug into secondary elevator board
DC motor output DC motor output up to 500 Hz
Low-side Driver Output (general purpose) General low-side driver output with LED display
Low-side Driver Output (general purpose) General low-side driver output with LED display
5.0 V VCC5 Supply External 5.0 V supply input for Digital (not mandatory if J5, J6 are selecting the 5.0 V tower supply)
Three 10-bit ADC inputs 10-bit ADC input for external monitoring (general / safety purpose)
Select the 5.0 V - 3.3 V Tower supply or
5.0 V external supply
Select the 5.0 V - 3.3 V Tower supply or 5.0 V external supply
Jumpers Selection for Daisy Chain / input PWM
motor control
Jumpers selection for Daisy Chain / input PWM motor control
Primary Connector Plug into primary elevator board
Elevator Board (Primary)
Elevator Board (Secondary)
MC34SB0410
Reset Switch
Jumper Selection for Daisy Chain /Input PWM
Motor Control Selection)
x4 Regulated / PWM
Valve Driver Outputs
Valves Power
AGND
6.0 V to 36 V
VPWR Supply
x3 10-bit ADC Inputs
5.0 V VCC5 Supply
Low-side Driver Output
(general purpose)
Low-side Driver Output
(general purpose)
DC Motor Output
Motor Jumper