TWR-SB0410-36EVB tower system platform
, Rev. 1.0
4
NXP Semiconductors
Getting started
2
Getting started
2.1
Kit contents/packing list
The TWR-SB0410-36EVB contents include:
• TWR-SB0410-36EVB tower board
• Plug-in connectors
• Warranty card
2.2
Jump start
NXP’s analog product development boards help to easily evaluate NXP products. These tools support analog mixed signal and power
solutions including monolithic ICs using proven high-volume SMARTMOS mixed signal technology, and system-in-package devices
utilizing power, SMARTMOS and MCU dies. NXP products enable longer battery life, smaller form factor, component count reduction,
ease of design, lower system cost, and improved performance in powering state of the art systems.
• Go to
• Review the tool summary page
• Look for
• Download documents, software, and other information
Once the files are downloaded, review the user guide in the bundle. The user guide includes setup instructions, BOM, and schematics.
Jump start bundles are available on each tool summary page with the most relevant and current information. The information includes
everything needed for design.
2.3
Required equipment and software
To use this kit, you need:
• Power supply 6.0 V to 36 V with current limit set initially to 2.25 A to 9.0 A
• Oscilloscope (preferably 4-channel) with current probe(s) (optional)
• Digital multimeter
• Typical loads (DC motor, valve)
• TWR-KL25Z48M or K20D72M or KV31F120M or other Tower boards (check compatibility)
• Kinetis Design Studio or compatible CodeWarrior for MCUs (Eclipse IDE). For information on getting started with
CodeWarrior, see the MC34ValveController Processor Expert Component User Guide.
2.4
System requirements
The kit requires the following to function properly with the software:
• USB-enabled PC with Windows® XP or higher
Jump Start Your Design
