manualshive.com logo in svg

NXP Semiconductors SMAC, Справочное руководство, Страница: 39 / 42

Поделиться
Скачать
NXP Semiconductors SMAC Скачать руководство пользователя страница 39

Primitives

Simple Media Access Controller (SMAC) for the HCS08 Reference Manual, Rev. 2.0

Freescale Semiconductor

3-19

 

Returns

gErrorNoError_c

If the radio has been set in the selected test mode.

gErrorBusy_c

When SMAC is busy in other radio activity like transmitting/receiving data or 
performing a channel scan, among others.

Usage

Call the MLMETestMode() function with the packet to be transmitted and the mode to be executed. See 
the notes for a list of modes implemented.

This following is a list of the modes implemented (defined as Macros):
gTestModePRBS9_c

Repeated transmits a PRBS9 pattern as long as enabled

gTestModeForceIdle_c

Forces the radio to back to the original IDLE mode.

gTestModeContinuousRx_c

Sets the radio into continuous RX mode.

gTestModeContinuousTxModulated_cSets the device to continuously transmit a 10101010 pattern.
gTestModeContinuousTxUnmodulated_cSets the device to continuously transmit an unmodulated CW

3.1.25

SMACDisableInterrupts

This function is called to disable the interrupts that are used by SMAC concerning the radio/transceiver:

•

For MC1323x platform devices - radio interrupts disabled in CNTRL2 register

•

For MC1320x and MC1321x platforms: SPI interrupts and the IRQ pin from radio are disabled

Prototype

void SMACDisableInterrupts(void);

Arguments

None

Returns

Nothing

Usage

Call this function to prevent SMAC from generating radio-based interrupts.

NOTE

Be aware that interrupts must be enabled for certain SMAC functions to 
operate properly.

Содержание SMAC











































Отзывы:

Нет отзывов