manualshive.com logo in svg

NXP Semiconductors SMAC, Справочное руководство, Страница: 35 / 42

Поделиться
Скачать
NXP Semiconductors SMAC Скачать руководство пользователя страница 35

Primitives

Simple Media Access Controller (SMAC) for the HCS08 Reference Manual, Rev. 2.0

Freescale Semiconductor

3-15

 

Usage

Call this function to hold the transceiver in reset.

3.1.19

XCVRRestart

For the MC1320x and MC1321x platforms, the MCU controls and asserts the transceiver hardware reset. 
This function de-asserts and releases the reset line of the transceiver. The function is called to release reset 
after calling XCVRContReset.

NOTE

This primitive can be used only on the MC1320x and MC1321x platforms. 
For the MC1323x platform, it is invalid.

Prototype

void XCVRRestart(void);

Arguments

None

Returns

Nothing

Usage

Call this function to release the transceiver hardware reset. The transceiver should be re-initialized after a 
reset.

3.1.20

MLMEGetPromiscuousMode

As standard practice SMAC allows the receiver function to filter incoming RX packets, allowing only 
SMAC-compatible packets to be recognized; see 

Section 3.1.23, “MLMESetPromiscuousMode

. This 

mode can be turned off (i.e., promiscuous mode) and all received packets will be reported. The 
MLMEGetPromiscuousMode function is used to determine the current state of SMAC’s promiscuous 
mode.

Prototype

bool_t MLMEGetPromiscuousMode(void)

Arguments

None

Returns

TRUE

If SMAC’s promiscuous mode is active.

Содержание SMAC











































Отзывы:

Нет отзывов