manualshive.com logo in svg

NXP Semiconductors SMAC, Справочное руководство, Страница: 29 / 42

Поделиться
Скачать
NXP Semiconductors SMAC Скачать руководство пользователя страница 29

Primitives

Simple Media Access Controller (SMAC) for the HCS08 Reference Manual, Rev. 2.0

Freescale Semiconductor

3-9

 

An 8-bit value for the output power desired.

Returns

gErrorNoError_c

If the action was performed.

gErrorOutOfRange_c If power exceeds the maximum power value.

Usage

This function can be called with an argument between 0 and 15 or using the MIN_POWER, 
MAX_POWER and NOMINAL_POWER macros.

3.1.11

MLMEPHYSoftReset

The MLMEPHYSoftReset function is called to perform a soft reset to the transceiver for all families. This 
function restarts PHY and SMAC states machines.

Prototype

smacErrors_t MLMEPHYSoftReset(void);

Arguments

None

Returns

gErrorNoError_c

If the action was performed.

Usage

Simply call the MLMEPHYSoftReset () function directly.

Table 3-1. U8PaValue vs MC13202 and MC13213 TX Power Out

U8PaValue

Typical Differential Power at 

Output Contact (dBm)

U8PaValue

Typical Differential Power at 

Output Contact (dBm)

0b0000

-16.6

0b1000

-1.0

0b0001

-16.0

0b1001

-0.5

0b0010

-15.3

0b1010

(Nominal)

0.0

0b0011

-14.8

0b1011

0.4

0b0100

-8.8

0b1100

2.1

0b0101

-8.1

0b1101

2.8

0b0110

-7.5

0b1110

3.5

0b0111

-6.9

0b1111

3.6

Содержание SMAC











































Отзывы:

Нет отзывов