NXP Semiconductors S32R274 EVB Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 39

NXP Semiconductors S32R274 EVB Скачать руководство пользователя страница 3

S32R274 EVB User Guide

4

Figure 1.

Figure 1.

Modular concept

– Mother board and MCU daughter card

Please consult the website at

www.nxp.com

or speak to your NXP representative for more details on the

availability of MCU daughter cards.

NOTE

For details on your specific daughter card, please consult the instructions
included with the daughter card.

The EVB is designed to use the motherboard and the daughter card in conjunction. However, it is
possible to use the daughter cards standalone.

1.3

Daughter Card Availability

A number of compatible daughter cards are available for the motherboard across a number of devices.
Table 2

gives an overview of daughter cards that can be used with MPC57xx motherboard and

associated devices, package sizes and part numbers.

Table 2.

Daughter card overview

Daughter card number

Device

Package

Socket

Nexus

S32R274RRUEVB

S32R274

257BGA

Yes

Yes

All daughter cards will be similar in design and concept. For details on the daughter cards please refer to
chapter 3.7.

2

EVB Features

The EVB system consists of a motherboard and a daughter card, both with distinct features.
The

mother board

provides the following key features:

•

Support provided for different MCUs by utilising MCU daughter cards

•

Single 12V external power supply input with four on-board regulators providing all of the
necessary EVB and MCU voltages; Power supplied to the EVB via a 2.1mm barrel style power
jack or a 2-way level connector; 12V operation allows in-car use if desired

•

Master power switch and regulator status LEDs

•

Two 240-way high-density daughter card expansion connectors allowing connection of the MCU
daughter card or a custom board for additional application specific circuitry

«
1
2
3
4
5
...
»

Содержание S32R274 EVB








































Отзывы:

Нет отзывов