NXP Semiconductors
UM11184
QN9080-001-M17
DK User’s Guide
UM11184
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
User Manual
Rev. 0
— January 2019
6 of 27
Fig 3.
Debugger connector
2.4 QN9080-001-M17 module
The QN9080-001-M17 module integrates the BLE radio, controller, protocol stack, BLE
antenna, NTAG, clocks, and profile software on a single chip, which provides a flexible
and easy usage of the BLE SoC solution. It includes a high-performance MCU (32-bit
Arm
®
Cortex
®
-M4F), on-chip memory, and peripherals for users to develop a truly
single-chip wireless MCU solution.
Fig 4.
Module board details
Table 3.
QN9080-001-M17 module board
’s mark information list
Number
Name
Description
1
Jumper J2
Jumper used to select the power NTAG inside.
2
Jumper J1
Jumper used to select the power for QN9080-001-M17.
3
Connector J4
Connector used to connect the NTAG antenna.
Table 4.
QN9080-001-M17
DK module’s default jumper settings
Jumper
Jumper setting
Function
J1
Pin 1, 2 shorted
The NTAG inside shares the same power
supply with the QN9080 inside.
J2
Pin 1, 2 shorted
QN9080-001-M17 is powered by an
on-board power supply.