NXP Semiconductors
UM11184
QN9080-001-M17
DK User’s Guide
UM11184
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
User Manual
Rev. 0
— January 2019
3 of 27
2. Hardware description
The QN9080-001-M17 DK board provides easy access to peripherals, such as buttons
and LEDs. The board also provides useful interfaces, such as the USB port for UART
communication, the CMSIS-DAP debugger, and the standard Arduino and Pmod
connector. The USB dongle is a Bluetooth
®
device powered by QN9080. It acts as a
master/slave when communicating with QN9080-001-M17 devices.
2.1 Hardware overview
The QN9080-001-M17 DK board is shown in
Fig 1
. The detailed information is listed in
Table 1
.
Fig 1.
Board overview
Table 1.
QN9080-001-M17 DK board
’s mark information list
Number
Name
Description
1
QN9080-001-M17 USB
port
The QN9080-001-M17 USB port provides power supply
to the whole board and the USB interface of the
QN9080-001-M17 chip.
2
LPC4322 USB port
The LPC4322 USB port provides power supply to the
whole board and the USB interface is connected to
LPC4322.
3
LPC4322
LPC4322 works as a JTAG/SWD debugger.
4
QN9080-001-M17
module
The QN9080-001-M17 module board.
5
Jumper JP1
This jumper selects the JTAG/SWD debugging target:
•
Open: on-board target (default).
•
Short: off-board target.
6
Jumper JP5
This jumper selects the LPC4322 working mode:
•
Short: DFU mode enabled.
•
Open: normal mode (default).