NXP Semiconductors
UM10300
User Manual OM6290
UM10300_1
© NXP B.V. 2008. All rights reserved.
User manual
Rev. 1.0— 8 August 2008
24 of 30
b. Verify the COM connection using the menu command ISP – Read Device
Signature
c. The Read Device Signature window pops up as below
Fig 12. Device signature read
Click on Close to close the window. If this all works, the COM port communicates
with the onboard controller. If reading the device signature does not function,
select Options – Advanced Options on the menubar of the FlashMagic program.
Then select the tab “Hardware Config” and uncheck the option “Use DTR and
RTS to control RST and P0.14”. Alternatively, place jumper J3.
7. Software
Description
To facilitate the understanding of the sample software, please review the training module
available soon on the website:
http://www.standardics.nxp.com/support/boards/om6290/
8. Schematic
The schematic and board layout are in a separate file on the CD or website:
http://www.standardics.nxp.com/support/boards/om6290/