NXP Semiconductors
UM10300
User Manual OM6290
UM10300_1
© NXP B.V. 2008. All rights reserved.
User manual
Rev. 1.0— 8 August 2008
17 of 30
5.1.1 Installing
μ
Vision
An evaluation version of
μ
Vision can be downloaded from the Keil website. Registration
is required. The latest version at the time of writing the first version of this manual was
3.22. The file name is mdk322a.exe. File size is close to 100 MB. After download has
completed, double click the executable and follow the instructions.
5.1.2 Keil
μ
Vision Quick Start
The kit firmware includes all the source code for the demo that is programmed into the on
board LPC2148 when shipped. The demo project can be modified and downloaded to
the board.
Run
μ
Vision and under the menu item “Project” select “Open Project”. Edit the source
code and again, under the “Project” menu item, select “Build Target of Build All Targets”.
To download the code to the board, follow the instruction for Flash Magic in section 5.2.
To create a new project to run on the LCD Eval Board, select The IDE has to be
configured for the microcontroller used on the OM6290 board. In order to do so, select
“Project” -> “New
μ
Vision Project” and enter a project name, after which a window similar
to that indicated in Fig 6 pops up. Select LPC2148.
Fig 6. Selecting the microcontroller