NXP Semiconductors
UM10300
User Manual OM6290
UM10300_1
© NXP B.V. 2008. All rights reserved.
User manual
Rev. 1.0— 8 August 2008
19 of 30
•
R/O: Read Only. This is code and constants.
•
R/W: Read and Write. This is data.
Fig 8. Linker options
5.1.3 Selection of the toolset
The downloaded demoboard firmware contains the file ‘OM6290 Demoboard.Uv2’ which
is the project configuration file. All settings are correct. In case settings are made
manually the information provided here is useful.
μ
Vision uses either the ARM RealView compilation tools, the ARM ADS compiler, the
GNU GCC compiler or the Keil CARM compiler. Older versions of the Keil uVision IDE
came with the CARM compiler and the GNU GCC compiler. After Keil became an ARM
company, the CARM compiler was replaced by RealView and current downloads don’t
include the CARM compiler anymore. It is recommended to use the RealView compiler
since this is also the tool used by NXP for the development of the code for this board. In
this case downloaded software will be compatible with the tool and time consuming fixes
and adaptations are avoided.